Source: Ningbo Eagle Intelligent Technology Co., Ltd
There are several reasons for vibration plate packing:
1, caused by stacked material.
2, leaving the gap is not enough gap
3, take the road is not smooth with burrs or walking material is not smooth, twists and turns is too small (sharp turn).
4, there are materials to non-ambitious approach came.
5, vibration plate amplitude is too large or too small. 6, track up the slope.
Vibration plate material solution:
1, feeding control switch, when the sensor to the vibration plate is expected, it will automatically let the auxiliary bucket down to the vibration plate. In the case of
2, linear feeder, can be connected to the vibration plate and the machine trajectory of the interval, so that more cutting material, not easy card material.
3, automatic accessories barrels, in order to save the accessories are still particularly designed, can automatically give the vibration plate accessories, the material more or less adjustable divert switch size.
4, photoelectric switch, when the induction to the feed trajectory when the material will automatically let the vibration plate to stop, when the air when the vibration plate to start, empty, full time when the factory lights warning, can save electricity to extend the life of the vibration plate The
Recommended products Keywords: Cixi vibration plate Ningbo vibration plate non-standard vibration plate |
Record: ICP.17021542
